Inlay (porcelain/metal) dental preparation set (for high speed/low speed bending machine)
Item number:FG 0908 D
Packing: 8 pcs/set
Model:TR-22，SF-D31，TF-D15，TF-D15F，TR-D10，TR-O9，TR-17F，TR-D36F
Packing: 8 pcs/set
Model:TR-22，SF-D31，TF-D15，TF-D15F，TR-D10，TR-O9，TR-17F，TR-D36F
Tag： Inlay (porcelain/metal) dental preparation set (for high speed/low speed bending machine)
Category:
- 产品描述
- Instructions
- Parameter
-
1. TR-22 : ISo 806 314 197 524 016 for prophylactic expansion of cavities.
2.SF-D31 : ISo 806 314 110 524 012 is used to prepare the depth of cavity retention shape and resistance shape, more than 2mm.
3.TF-D15 : ISO 806 314 170524 020 metal inlay to prepare the bottom plane of the hole, with clear points and line angles.
4.TF-D15F: ISO 806 314 170 514 020 metal inlay to prepare hole bevel, make a 45-degree bevel on the enamel of the hole edge, about 1.5 mm wide, side wall: parallel or abduct 2~5 degrees, and in place Road direction is the same.
5.TR-D10 : ISO 806 314 196 524020
6.TR-09: ISO 806 314196 524 025 Porcelain inlay preparation hole bottom axis surface point line angle is clear, round and blunt without thin wall and weak sharp side wall: abduction 2~5 degrees, and consistent with the direction of the in-place channel.
7.TR-17F: ISO 806 314 196 514 021
8.TR-D36F : ISo ISo 806 314 198 514 024 is used for finishing and polishing of cavities, and the dots, lines and corners are clear and round.
Related products
Product Inquiry
Official Account
WeChat ID
-
-
E-mail
-
Contact phone number