(Summary description)Toboom Daobang Abrasives Co., Ltd. is committed to the development and manufacture of dental rotary tools and dental related equipment series products
(Summary description)Toboom Daobang Abrasives Co., Ltd. is committed to the development and manufacture of dental rotary tools and dental related equipment series products
Toboom Daobang Abrasives Co., Ltd. is committed to the research and development and manufacture of dental rotary tools and dental related equipment series. At present, the products mainly developed for clinical/technical laboratories mainly include polishers, grinders, burs, and root canal files. Series etc.
This time, Toboom and Sirona Dental Equipment Co., Ltd. are mainly aimed at introducing and using the functions of training products for high-end dental clinics in Jiangsu, Zhejiang and Shanghai.
The high-brightness polishing solution for glass ceramic and elastic ceramic chairside (without glazing) shortens the chairside operation time, and at the same time achieves high-brightness polishing effect, which brings dentists and technicians. Great convenience, both in terms of product performance and product use and operation, the market leader of Daobang has made a detailed introduction in this product knowledge training.
Live interactive demonstration
Let us take a look at these two sets of products together:
1. Glass ceramic finishing high-brightness polishing suit HP 1210 D (for low-speed straight machine)
2. Elastic ceramic finishing high-brightness polishing suit HP 1310 D (for low-speed straight machine)
Let's take glass ceramics as an example. Let me introduce to you the use, characteristics and usage of the product:
Product Usage:
It is used for clinical blending, shape trimming and high-brightness polishing of glass-ceramic restorations after trimming.
Features:
The humanized solution shortens the operating time by the chair, and can achieve high-brightness polishing effect without glazing.
Use steps and techniques:
The first step: Use the red label ceramic CD 202 4 grinding head to quickly grind the sprue, the grinding allowance is limited, and the shape of the tooth must not be damaged. If a single crown appears high on the occlusal surface when trying on it in the mouth, use a ceramic CD 212 4 grinding head to polish the residue of the high-point occlusal paper.
(Recommended speed 20000-30000)
Step 2: Smooth and pre-polish the occlusal dimples with a red-labeled silica gel SD 213 3 grinding head. Do not use point contact when using the flame-shaped grinding head, but face-to-surface contact. Do not place a 90° angle to avoid excessive consumption of the grinding head and also fail to achieve the repair effect. Use SD 242 3 grinding head on the tongue side and the clip side, and the grinding angle is 35-45°. Grind the abutting surface with SD 2343 grinding head.
(Recommended speed 10000-15000)
The third step: use white label rubber RD 213 7A, RD 242 7A, RD 234 7A, the same way to operate, pay attention to polishing
Reduce the speed. No need to use with polishing paste, no need to apply too much pressure, light touch intermittent natural grinding. Can reach
High-brightness polished aesthetic repair effect. (Recommended speed 6000-12000)
Scan the QR code to read on your phone
Page Copyright ©2021All Rights Reserved.Shanghai TOBOOM Technology Co., Ltd Powered by www.300.cn 沪ICP备2020028574号-1
Scan